Image 3-5
Rear mounting of the AEC
A
Hammer bolts
3.3 Connections
What has to be done ?
Connecting the power and data cables with the AEC.
•
The power for the AEC is branched of from the 'POWER OUT' socket of the last tile in a power circuit of maximum six tiles.
•
The data stream of the tiles is somewhere interrupted to insert the data cables of the AEC in series with the tiles. Where this
data insertion happens does not matter.
Image 3-6
AEC connectors
A
'DATA IN' socket
B
'DATA OUT' socket
C
'POWER IN' socket
D
Plug holder clamp
E
Unused socket hole, sealed with a plastic cap.
R5976153 AEC 04112002
3. Physical Installation
13