Table of Contents
Advertisement
Pairing for stereo mode
Two identical wireless speakers
(Philips S4807) can pair with each other
for stereo sound.
Note
• Any speaker can be used as the primary
speaker.
• The speaker connected to a Bluetooth
device can only be used as the primary
speaker.
• Before stereo pairing, make sure that the
secondary speaker is under Bluetooth
pairing mode.
• Keep a maximum distance of 20 meters
(66 feet) between the speaker and your
Bluetooth device.
• In stereo mode, the button operation on
the secondary speaker is as same as that
of the primary speaker.
1
Press
to power on both speakers,
they will enter Bluetooth pairing mode
automatically. The speaker connected
to your Bluetooth device will be used
as the primary speaker.
2
On the primary speaker, press and
hold
to enter stereo pairing mode
until the LED indicator blinks blue and
green alternately.
3
Press
on either speaker. The
music will be played through both
speakers.
To exit the stereo mode, press and hold
the
on either speaker.
EN
6
3 Sec.
3 Sec.
5 Product
information
Note
• Product information is subject to change
without prior notice.
General information
USB port
Built-in Lithium battery 3.7V, 4400mhA
Dimensions (W x H x D) 70 x 70 x 169 mm
Weight (main unit)
Operation Ambient
IP protection class
Ampli er
Output power
Frequency response
Signal to noise ratio
Speakers
Impedance
Maximum input power 10W
Size
Bluetooth
Bluetooth version
Frequency range
Maximum
transmitionpower
Compatible
Bluetoothpro les
Bluetooth range
5V
2A
492 g
0 ℃~45 ℃
IP67
10 W
80 Hz - 20KHz
> 75dB
4
44 x 80 mm
5.2
2402 - 2480 MHz
6dBm
HFP V1.7
up to 20m
Advertisement
Table of Contents
