Canon MiniTT1 Owner's Manual page 37

Specifications
Camera/P1
Flash/P2 Port
Voltage present
Hot Shoe voltage protection
USB
Mounting
Construction
Dimensions
Antenna
Weight (with batteries)
Operating Temperature
Storage Temperature
37
(cont'd)
MiniTT1
3.3 VDC (all pins) - safe for all Canon cameras 3.3 VDC (all pins) - safe for all Canon cameras
Hot Shoe: up to 50V
5VDC regulated, 100mA
Pin 1 Positive, Pin 4 Ground
Hot-shoe
High impact plastic, captive battery door.
Hot-shoe made of glass reinforced resin.
2.8" (7.1 cm) long x 1.9" (4.9 cm)
wide x 1.3" (3.3 cm) tall
Internal
2.3 oz (65 grams)
2.0 oz (57 grams) without battery
Above -15 C (5 F) and below 50 C (120 F)
Above -30 C (-22 F) and below 85 C (185 F)
without batteries
FlexTT5
Port 1/8" (3.5 mm) stereo miniphone for
2-stage remote camera triggering.
Port Voltage Handling: up to 50 Volts,
100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
1/8" (3.5 mm) mono miniphone.
Port Voltage Handling: up to 200 Volts,
4 amps peak, 250 milliamp continuous,
non-polarized
Hot Shoe: up to 50V
5VDC regulated, 100mA
Pin 1 Positive, Pin 4 Ground
Hot-shoe, 1/4-20, lanyard, Velcro
High impact plastic, captive battery door.
Hot-shoe made of glass reinforced resin.
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x
1.4" (3.6 cm) tall, antenna lowered
2.7" (6.9 cm) rubberized, 180 degree swing
5.4 oz (153 grams)
3.8 oz (108 grams) without batteries
Above -15 C (5 F) and below 50 C (120 F)
Above -30 C (-22 F) and below 85 C (185 F)
without batteries