Displaying Last Image Taken; Selecting Flash Mode; Led Light - Oregon Scientific DS8618 User Manual

Hide thumbs Also See for DS8618:
Table of Contents

Advertisement

DISPLAYING LAST IMAGE TAKEN

You can display the last image taken as well as other images by moving
Mode Switch to
it by pressing to confirm. The delete confirmation screen will be shown on
the LCD. Press the SET button to confirm deletion, or press the MENU
button to cancel. Move to Mode Switch to

SELECTING FLASH MODE

Press
LCD. When a picture with flash has been taken, the left LED will blink
green while the flash is recharging. Once the LED stops blinking, you
can resume taking pictures again. When no flash is set, the right LED
will blink green.
ICON

LED LIGHT

The LED lights mean the following:
DS8618 EngManl r20(V1.1) OP
All manuals and user guides at all-guides.com
. When viewing the last image, you may choose to delete
to turn the camera flash on and observe the flash icon on the
FUNCTION
Auto
Flash On
Flash Off
Right LED is red: camera cannot focus
Right LED is flashing red: memory card error
Right LED is green: ready to take picture with full-press shutter
Right LED is green: after half-press shutter to lock focus
Right LED is flashing green: camera is busy in progress
Left LED is red: battery is charging
Left LED is green: flash is fully charged and ready
Left LED is flashing green: flash is charging
8
¶´ƒ
to return to shooting.
DESCRIPTION
The flash may go off automatically,
depending on light conditions.
The flash goes off regardless of
lighting condition.
The flash will not go off (default
setting).
7
11/17/04, 2:39 PM

Advertisement

Table of Contents
loading

Table of Contents