Related Manuals for Rangemaster TXIQ8
Summary of Contents for Rangemaster TXIQ8
- Page 1 Rangemaster TXIQ8 8 Channel remote control User manual Order code: TXIQ8 Revision Date: 17.06.2021 R O F E S S I O H O O T I N G R O U N D U T O M A T I O N...
-
Page 2: Table Of Contents
3. LIMITED WARRANTY..........................9 4. RMA FORM............................10 Copyright Maxima WarenhandelsGmbH © Rangemaster Systems - all material published on this manual is protected by copyright including design of circuits and software. You are expressly prohibited from electronically storing any material found here or republishing it by any means. -
Page 3: Description Of The Unit
Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 1. DESCRIPTION OF THE UNIT Rangemaster TXIQ8 is an 8 channel remote control of the “IQ series” 1.1 FEATURES 8 Channels • 32 possible addresses • Digital encryption • No interference with other layouts •... -
Page 4: Operating
Rangemaster X3 sequencer (all-in-one range management system) 2. OPERATING 2.1 FUNCTIONALITY In accordance to the discipline TXIQ8 remote control can be used the following ways: Button Functionality in ROUND MODE (COMPETITIONS) Zero for single target or first target in the double... -
Page 5: Opening/Closing The Enclosure
Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 Button Functionality in TRAINING MODE Manual release of: A (sporting), high house (skeet), right target (trap) Manual release of: B (sporting), low house (skeet), center target (trap) Manual release of: C (sporting), double (skeet), left target (trap) -
Page 6: Txeco Mode
Order code: TXIQ8 2.3 TXECO MODE In case the remote control is used with Rangemaster X2 or Rangemaster X3 Pro/.Net sequencers, TXECO mode should be activated (maximum 32 layouts can be used simultaneously). To activate TXECO mode lift the 8 switch on the DIP switch placed on the PCB inside the enclosure. -
Page 7: Address Table
Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 2.4.1 ADDRESS TABLE LAYOUT MODE DIP switch/ Channel RANGEMASTER SYSTEMS-Maxima WarenhandelsGmbH Web: www.rangemaster.at Phone:+43 699 10403204 Rev.date:17/06/21 Page: 6 8010 Graz, Dr. Robert Graf Straße 64/9, Austria/Europe Mail: info@rangemaster.at Fax:+43 720 920 195... - Page 8 Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 CHANNEL MODE DIP switch/ Channel RANGEMASTER SYSTEMS-Maxima WarenhandelsGmbH Web: www.rangemaster.at Phone:+43 699 10403204 Rev.date:17/06/21 Page: 7 8010 Graz, Dr. Robert Graf Straße 64/9, Austria/Europe Mail: info@rangemaster.at Fax:+43 720 920 195...
-
Page 9: Batteries
Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 2.5 BATTERIES To change the batteries, open the enclosure (refer to 2.2), remove discharged batteries and insert new ones. For the remote control use batteries 2 x CR2032. In order to make sure that contact of the batteries is good, every time when changing the batteries, please push the connecting parts of the battery holder inside: To check the batteries voltage, please use voltmeter and test the battery level while pushing the button. -
Page 10: Limited Warranty
This period starts upon receipt of the product. Rangemaster Systems will not be liable for loss of data or loss of profit or turnover due to a defect. The warranty only includes repair or replacement of defect components, which failed during daily use. -
Page 11: Rma Form
Rangemaster TXIQ8 – 8 Channel remote control Order code: TXIQ8 4. RMA FORM Maxima WarenhandelsGmbH © Rangemaster Systems – Ext. Storage 8082 Weissenbach 9 Austria/Europe RMA:________________ Date:______/_______/____________ Date of purchase Supplied by Invoice number (Please attach copy of invoice) Product serial number...