Download Print this page
Bunn VP17A Installation And Operating Manual
Bunn VP17A Installation And Operating Manual

Bunn VP17A Installation And Operating Manual

Operating & service manual - vp17a
Hide thumbs Also See for VP17A:

Advertisement

VP17A
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601
FAX: (217) 529-6644
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
10860.0001E 02/09 ©1997 Bunn-O-Matic Corporation

Advertisement

loading

Summary of Contents for Bunn VP17A

  • Page 1 To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
  • Page 2 SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
  • Page 3: User Notices

    Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should be kept in good condition. Replace any unreadable or damaged labels. PN: 00658.0000G 02/08 © 1985 BUNN-O-MATIC CORPORATION # 00658.0000 To reduce the risk of electric shock, do not remove or open cover.
  • Page 4: Electrical Requirements

    CAUTION - The brewer must be disconnected from the power source until specified in Initial Set-Up. The brewer requires 2-wire, grounded service rated 220 - 240 volts ac, 20 amp, single phase, 50 Hz. An all pole disconnect means must be incorporated in the fixed wiring according to local wiring regulations.
  • Page 5: Initial Setup

    8. Empty the dispenser. The brewer is now ready for use in accordance with the coffee brewing instructions below. 1. Insert a BUNN filter into the funnel. ® 2. Pour the fresh coffee into the filter and level the bed of grounds by gently shaking.
  • Page 6 MAIN ON/OFF SWITCH (Late Models only) 2 TOP or SIDE WARMERS NOT USED ON LATE MODELS WITH SIDE WARMERS 220-240 VOLTS AC 2 WIRE + GND SINGLE PHASE 10862.0001L 01/07 ©1995 BUNN-O-MATIC CORPORATION Page 6 10860.1 040407...
  • Page 7 Page 7 10860.1 091300...
  • Page 8 Page 8 10860.1 091300...