Gateway E-265 User Manual page 11

Using the Intel video driver
Use the following procedures if your notebook uses the Intel
video driver.
To use two external monitors with Intel video:
1
2
3
4
5
6
7
To switch back to viewing the display only on your
notebook LCD screen with Intel video:
1
2
3
www.gateway.com
The VGA monitor will display before the DVI monitor. For best
results, use the VGA monitor as your primary monitor and the DVI
monitor as your secondary monitor.
Right-click the desktop, then click Graphics Properties.
The Intel Graphics Media Accelerator Driver opens.
Click Extended, in the Multiple Display area on the
Display Devices tab.
Click the arrow button to open the Primary Device list,
then click the monitor that is physically located on your
left.
Monitor is the monitor connected to the monitor port. Digital
Display is the monitor connected to the DVI port.
If the Confirm the Desktop Change dialog box opens,
click OK.
Click the arrow button to open the Secondary Device
list, then click the monitor that is physically located on
your right.
If the Confirm the Desktop Change dialog box opens,
click OK.
To adjust the display settings of either monitor, click the
Display Settings tab, then click the tab for the monitor
you are adjusting.
Right-click the desktop, then click Graphics Properties.
The Intel Graphics Media Accelerator Driver dialog box
opens.
Click Notebook, in the Single Display area on the
Display Devices tab.
If the Confirm the Desktop Change dialog box opens,
click OK.
9