Camera Setup - Stealth Cam DS4K Ultimate Instruction Manual

Camera Setup

Battery Installation
Open camera and lift out battery tray by top notch provided.
With the tray removed, insert 12 new AA batteries, being
careful to match orientation marked on tray. After batteries are
inserted, align metal contacts and reinsert battery tray into
camera. If you are using an external power source, ensure
that it is 12V. Other voltage levels could damage your camera.
NOTE: Do not mix new and old batteries or alkaline and lithium batteries.
SD Card Installation
The SD card slot is located on the left side of your camera.
A class 10 SD card is required, use of a different card may
produce unexpected results. Insert SD card with label facing
you, as shown in diagram on the left. When inserting SD card
you should only feel minimal resistance and a click when the
card is fully inserted.
NOTE: For optimal performance use a Stealth Cam class 10 SD card.
Page 8