Adding Maps From Multiple Mapsource Products - Garmin MapSource User Manual

U M S > L
SING AP OURCE OADING
To select maps around waypoints, routes,
or tracks:
Right-click a route, waypoint, or track in its
Data tab and click Select Maps Around Route
(Waypoint/Track) from the shortcut menu.
NOTE: Some MapSource products sell area maps
separately. You can only select maps that you have
purchased and installed on your computer.
Adding Maps from Multiple MapSource
Products
You can add maps from more than one MapSource
product to a map set, but you can only see data from
one product on your GPS unit if the maps overlap.
The maps are not transparent on the unit and cannot be
combined.
If two maps from different MapSource products
overlap on your GPS unit, you need to turn the
overlapping map off in order to see the other map
underneath. Check your GPS unit owner's manual to
learn how to turn MapSource maps on or off.
12
M Y G GPS U
APS TO OUR ARMIN NIT
For example, if you select both Topographical and
Roads & Recreational data for the same geographical
area, you will not see a combination of topographic
and road data. You will only see data from the Roads &
Recreation data set. In order to see the Topographical
data, turn the Roads & Recreational data off in your
GPS unit.
MapSource User's Manual