Safety Instructions; Environmentally-Friendly Disposal; Installation Surface - Bosch WIS28440GB Installation And Assembly Instructions

Safety instructions

– The washing machine is heavy - take care when lift
– Caution: frozen hoses can crack/burst. Do not insta
areas exposed to frost.
– The washing machine could be damaged. Do not lift the appliance by protruding
components (e.g. the washing machine door).
– In addition to the instructions provided in this do
relevant water and electric utility companies may a
– If in doubt, have a technician connect the applianc
– The worktop must have no openings in the area arou
– Route hoses and cables in such a way that there is no risk of tripping.

Environmentally-friendly disposal

Installation surface

– The machine must be stable so that it does not move around.
– The surface on which it is installed must be firm an
– Soft floors/floor coverings are not suitable.
Installation using slider sheets
Slide sheets make it easier to slide the
washing machine into the installation recess.
Order using spare part no. 66 1827
Before sliding in the machine, dampen the slide she ets with a
mixture of water and detergent. Do not use any fat
Installation under a high-level worktop
– Adjustment strips: order no. WZ 20470, WMZ 20470, Z 7
– Height adjustment kit: order no. WZ 20440, WMZ 20440
Installation on a pedestal
The front feet of the washing machine must be secured with holding brackets.
Order no. WMZ 2200, WX 975600, CZ 110600, Z 7080X0
Installation on a wood joist floor
– If possible, place the washing machine in a corner.
– Screw a water-resistant wooden plate (min. 30 mm th
In doing so, take into account the height of the kitch en worktop.
– The feet of the washing machine must be secured with holding brackets.
* Order no. WMZ 2200, WX 975600, CZ 110600, Z 7080X0
All manuals and user guides at all-guides.com
ing.
ll the washing machine outdoors or in
cument, special regulations from the
pply.
e.
nd the washing machine.
d level.
and/or oil.
-> Appliance dimensions, Page 3
090X0
, Z 7060X0
ick) to the floor.
Scope of delivery
Aqua
or
Covers
with hose clip
Hose clamp
for securing the water drain
hose -> Page 5
Parts for assembly -> Page 8 - 13
1
Moisture inside the drum
depending on model
is due to final testing.
Elbow
for securing the
water outlet hose
Spanner
(depending on model)
Mains cable
Water outlet
Water inlet
2