Close; Inside; Empty To Waypoint: Cannot Compute Nav; Gps Communications Failure - Garmin Apollo SL50 User Manual

Close

This condition occurs when the airspace is less than
2 nm (or user-selected limit in System Mode, see
page 66).
Within 2 nm

Inside

This condition occurs when the plane penetrates the
airspace.
Inside

Empty To Waypoint: Cannot Compute Nav

Anytime the current To waypoint is empty, this
message is generated. It becomes an old message
after viewing.
Empty To Waypoint: Cannot Compute Nav

GPS Communications Failure

When the GPS sensor stops communicating (after it
has established communications), this message is
generated. It becomes an old message after viewing.
GPS Communications Failure

GPS Command Failure

When data is being received from the GPS sensor
but responses to commands sent to the GPS sensor
are not being received, this message is generated.
This problem indicates that the GPS is not receiving
transmissions and cannot be used for IFR flight. It
becomes an old message after viewing and remains
an old message even if the condition does not
persist.
Tx to GPS Failed:
Message Function
SUNDANCE
NORTON AFB
Not for IFR
99