Sylvania CONCORD Aluna SP/LED Quick Start Manual

Aluna SP/LED
119
60
It is necessary to place the gasket exactly
into its seat as shown in the picture. Then
screw on gently the frame and tighten it
by the key 4068469.
Concord
¯140
¯106
90
Installation:
• feeding must be done through
DC stabilized secondary tension. The floodlight is supplied by us with
the LED pre-installed and connected with 5.5 meters cable section
2x1mm
The cable and the fixture must not be tampered with for any reason.
• max. installation depth 10m.
Relamping and maintenance:
• The relamping must be done with maximum attention avoiding to dirty the
sealing gasket and its contact surface. It is therefore necessary before opening
the fixture to carefully wipe the floodlight then unscrew the round frame by the
proper key (code 4068469) - If the gasket is damaged, deformed or not in perfect
conditions it is necessary to change it with the one enclosed in the packing. (see
figure)
• it is essential to do a frequent cleaning of the glass and of the outer surface
of the fixture to avoid build up of mud and dirtiness resulting in dangerous
overheating due to obscured light and heat dissipation. Clean the glass screen
carefully by removing limestone deposits by means of a scraper.
Avis Way, Newhaven East Sussex BN9 0ED UK
underwater model for very low voltage - 12V DC
glass features: plane float glass - safety tempered
according CENELEC HD 22.16.S1
2
Feilo Sylvania Europe LTD
www.feilosylvania.com
IS500
a safety power (SELV) providing 12V
(for AD8 water submersion).
© Concord Lighting Limited 02.18
IS13108B
IP
68
max
10m
MI/1710-C - 3 a ed
ISO ISO
14001 9001
Environmental Quality
Management Management
EM 539002 FM 01687