Table of Contents
Advertisement
Status Bar, Backlighting and On-Screen Messages
At the top of each page, a Status Bar (which is always displayed)
provides current status information for several unit features.
• Power to the unit is provided by batteries or from an auxiliary
source (AC or DC Adapter). The Battery Power icon displays the
remaining power as the battery becomes depleted.
• Satellite signal status is shown when searching for (acquiring)
satellites, when a two-dimensional fix is attained and when four or
more satellites have been received (three dimensional fix).
• Backlighting is Off when you power up the unit. When On, it
uses a significant amount of battery power. This icon displays
when the backlight is functioning.
• The Alarm Clock icon displays whenever the Alarm is set.
• The USB cable icon displays when the unit is in communi-
cation with a PC Universal Serial Bus.
You can adjust the backlight level by pressing down on the POWER
key and releasing. Then tap the POWER key or ROCKER key Up/Down
arrows to cycle through the levels of backlight adjustment. See page 46
for information on changing the display colors and backlight timeout
and brightness levels.
Whenever a significant event in the operation of the unit occurs, an
on-screen message appears to advise you of the occurrence. In each case,
the condition is described and often a remedy provided. Pressing the
ENTER key acknowledges the message and closes the window.
GPSmap 60C
Getting Started
The Main Page Features
Status Bar
Battery Power
Backlight is On
Acquiring Satellites
2-Dimension Navigation
Auxiliary Power
3-Dimension Navigation
Backlight Adjustment
Slider
(Brightness varies
according to battery
power level.)
Alarm is Set
USB is Connected
On-Screen Messages
7
Advertisement
Table of Contents
