Table of Contents
Advertisement
Please also note the additional information for MP3 mode .
■
The national copyright laws that apply in your country must be observed.
■
The CD-player does not contain parts that need to be serviced or repaired. In
■
the case of a defective CD player, please visit a specialist garage.
Player operation
Press the
button and then the CD function key (internal CD drive), NAV
MEDIA
(connected MFP) or AUX
» page
9, Advice for dealing with external sources.
CD - changes over to an inserted CD
■
■
SCN - All tracks from the current audio source will be played for 10 seconds;
the scan function can also be started or stopped by briefly pressing the menu
button
.
2
■
SCAN CD - plays a track of a CD
SCAN FOLDER - plays a track in the selected folder
■
SCAN PLAYLIST - Plays a playlist (folder of selected tracks from each folder
■
stored on the CD); only appears when a playlist has been created on the CD
being played
MIX - plays all tracks in the current audio source in random order
■
■
The activated MIX function is underlined to highlight it.
MIX CD - plays the tracks on a CD in random order
■
MIX FOLDER - plays the tracks in the selected folder in random order
■
MIX PLAYLIST - Plays a playlist (folder of selected tracks from individual
■
folders that is stored on the CD) in random order; only appears when a play-
list has been created on the CD being played
- scrolls up in the folders
■
■
- scrolls down in the folders
INF - by pressing the INF function button again, additional information about
■
MP3 files can be selected in the display
■
TITLE - name of the track
ARTIST - name of the performer
■
ALBUM - name of the album
■
■
FILE - file
FOLDER - folder
■
SCR - Information about MP3 files with lengths that extend beyond the
■
screen area; by pressing this button, the entire text information is displayed
step by step
NAV - Changes to the connected multi-function device
■
■
AUX - Changes to an external source connected to an AUX multimedia in-
put
» page
9, Advice for dealing with external sources
8
CD player
General information for MP3 operation
Requirements for the MP3 data and data carrier
›
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
›
The CDs must correspond to the ISO 9660 Level 2 standard as well as the Joliet
data system (single and multi-session).
›
Data names must be no longer than 64 characters.
›
The list structure is restricted to a depth of 8 list levels.
›
The name of the artist, the album and the title of the MP3 file being played can
be shown, providing this information is available as an ID3 tag
operation. The list and data name will be displayed if there is no ID3 tag.
›
WMA data (Windows Media Audio) can also be played even if the copyright is
additionally protected by the DRM procedure (Digital Rights Management). Such
WMA data is not supported by the unit.
Bit rate (data flow per time unit)
›
The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.
›
The indicated playing time data with variable bit rates is not reliable.
» page
8, Player
Advertisement
Table of Contents
