2. Press release the
to capture the pointer location
and open the information page
for the map item.
3. Select Save. If there is no
information for that point, a
"No map information at this
point. Do you want to create a
user waypoint here?" prompt
appears. Select Yes.
Editing Waypoints
You can edit waypoints to change
the symbol, name, note, location,
and elevation.
To edit a waypoint:
1. Press and hold FIND.
2. Select Waypoints.
3. Select the waypoint you
want to edit, and press the
ROCKER.
eTrex Legend H and eTrex Vista H Owner's Manual
ROCKER
4. Make changes by highlighting
each field. Use the
waypoint symbol chart and
alphanumeric keypad to enter
new data.
To delete a waypoint:
From the Waypoints page,
select the waypoint you want
to delete > Delete.
NOTE: When you delete a
waypoint, you cannot recover
it from the unit.
To move a waypoint on the
Map Page:
1. Press
FIND
2. Select the waypoint you
want to move, and press the
ROCKER.
3. Select
Map
to show the
waypoint on the map.
Basic Operation
> Waypoints.