Neilsen CT2274 Instructions

25 PIECE SCREW EXTRACTOR / DRILL & GUIDE SET
SAFETY
DO NOT use the stud extractor set for any purpose other than for which it is designed.
Keep the kit free from dirt and grime.
Ensure your work area is tidy and free from hazards.
Ensure the correct sizes of guide and drill are used to avoid injury and damage to the set.
WARNING: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood that
common sense and caution are factors which cannot be built into this product, but must be
applied by the operator.
CONTENTS
NO Description
case Blow Molded Case
D1 1/8" (3.175MM) HSS Drill
D2 3/16" (4.76mm) HSS Drill
D3 1/4" (6.35mm) HSS Drill
D4 5/16" (7.94MM) HSS Drill
D5 11/32" (8.73mm) HSS Drill
P1 #1 Extractor Pin
P2 #2 Extractor Pin
P3 #3 Extractor Pin
P4 #4 Extractor Pin
P5 #5 Extractor Pin
G1 G1 Drillling Guide
G2 G2 Drilling Guide
CT2274
INSTRUCTIONS
NO Description
G3 G3 Drilling Guide
G4 G4 Drilling Guide
G5 G5 Drilling Guide
G6 G6 Drilling Guide
G7 G7 Drilling Guide
G8 G8 Drilling Guide
G9 G9 Drilling Guide
G10 G10 Drilling Guide
N1 N1 Extractor Nut
N2 N2 Extractor Nut
N3 N3 Extractor Nut
N4 N4 Extractor Nut
N5 N5 Extractor Nut