Download Print this page
PAC RPK4-HD1101 Instruction Manual

PAC RPK4-HD1101 Instruction Manual

Complete radio replacement kit with integrated climate control retention for honda accord 2003-2007

Advertisement

Quick Links

RPK4-HD1101
Overview
The RPK4-HD1101 is a complete radio replacement kit with integrated climate control retention for the 2003-2007 Honda Accord. This kit
utilizes a user friendly pair of HVAC control knobs for a factory look and experience. Using the supplied interchangeable inserts, this kit is
compatible with both single zone and dual zone HVAC systems. This kit is also programmable for use in both left hand drive and right hand
drive vehicles. The included radio replacement interface will retain factory steering wheel controls (SWC) and allows you to program two
radio functions to each SWC button by using short press long press dual command functionality. The interface also provides data bus driven
outputs such as vehicle speed sensor (VSS), reverse trigger and parking brake.
Parts List
The RPK4-HD1101 includes everything you need for a professional installation of an aftermarket radio in your Accord.
This kit contains:
1.
Dash Kit
1
a.
(x1) HVAC Control Panel
1
b.
(x2) Radio Mounting Brackets (One left and one right)
1
c.
(x1) Pocket (For single DIN applications)
1
d.
(x8) Radio Mounting Screws
2. Lower Pocket
3. Climate and Steering Wheel Control Interface Module
4. Adapter for Vehicles Equipped with the Factory Navigation Radio
5. HVAC Knob Inserts (Single Zone and Dual Zone)
6. Radio Connection Harnesses
7. 1 Sheet of HVAC Duct Sealing Material. (Used when the factory foam
has deteriorated between the ducts behind the radio.)
8. USBDMA3 - USB extension for use with the aftermarket radio
Important Notes
***Please check all functions of the factory steering wheel controls and HVAC system and make sure it is all
1. This version of instructions are ONLY intended for use with product version R.2.1.2.13 or later.
2. The Pink / Black data input wire only needs to be connected in vehicles equipped with single zone climate controls. See page 6 to identify the
HVAC system in the vehicle.
3. The White / Black navigation SWC input wire only needs to be connected in vehicles equipped with the factory navigation radio, and when the
supporting "Voice" and "Back" steering wheel controls are present.
4.
it will enter this programming mode. Please see page 6 for proper selection.
5.
included PAC USBDMA3.
P
ifi A
C
ti
Table of Contents:
1. Factory Radio Removal ----------------------------------------------------- 1-2
2. Sub-Dash Preparation Sealing the Air Ducts------------------------------ 3
3. Radio Replacement Installation and Wiring Instructions-------------- 3-4
4. Kit Assembly Instructions -------------------------------------------------- 5-6
5. Settings Menu (including SWC programming)------------------------- 7-10
1a.
1d.
4.
in good working order before proceeding with this install.***
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
1c.
7.
6.
PAC-audio.com
Complete Radio Replacement Kit with
Integrated Climate Control Retention for
2003-2007 Honda Accord
Page:
2.
8.
1b.
5.
3.
Rev: V8
Date: 081318
Page 1

Advertisement

loading

Summary of Contents for PAC RPK4-HD1101

  • Page 1 Overview The RPK4-HD1101 is a complete radio replacement kit with integrated climate control retention for the 2003-2007 Honda Accord. This kit utilizes a user friendly pair of HVAC control knobs for a factory look and experience. Using the supplied interchangeable inserts, this kit is compatible with both single zone and dual zone HVAC systems.
  • Page 2 (E). the lid, then remove the pocket. and set aside. © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 2 PAC-audio.com Date: 081318...
  • Page 3 Make all connections between the aftermarket radio and the RPK4-HD1101 harness as described in the chart on the next page. This includes the SWC 3.5mm jack or the SWC wire (aftermarket radio MUST support a wired remote input).
  • Page 4 HVAC kit to function incorrectly. Reference the the sticker on Single Zone To Aftermarket Climate Controls Radio Harness © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 4 PAC-audio.com Date: 081318 ifi A...
  • Page 5 Install upper panel in reverse order as removed in steps 1.1 and 1.2 making sure to plug in the hazard switch and the navigation sub display (if equipped). © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 5 PAC-audio.com...
  • Page 6 4. Once the desired selection is shown, press the rear defrost button to save and exit. (next to the button) © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 6 PAC-audio.com...
  • Page 7 SWC button for longer than two seconds will initiate the long press command. If you wish to assign dual command functionality to the SWC please follow the programming steps on the next page. © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 7 PAC-audio.com...
  • Page 8: Programming Sequence

    Once the desired selection is shown, press the rear defrost button (next to the button) to save and exit. © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 8 PAC-audio.com...
  • Page 9 Once the desired selection is shown, press the rear defrost button (next to the button) to save and exit. © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 9 PAC-audio.com...
  • Page 10 RPK4-HD1101 product page on the PAC website (PAC-audio.com). Technical Support and Product Updates (Firmware) Email: support@PAC-audio.com Phone: 866-931-8021 International: 727-572-9255 ext 230 © 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. Rev: V8 Page 10 PAC-audio.com Date: 081318...