Printing A Network Status Sheet; Printing A Network Connection Report - Epson ET-3850 User Manual

3. Select Wi-Fi (Recommended).
4. Select Start Setup or Change Settings.
5. Select Push Button Setup (WPS).
6. Follow the instructions on the LCD screen to complete WPS setup.
Note: Make sure you select Start Setup within two minutes of activating WPS on your router.
7. Press the
You see the
from your computer or device, and then print. If you are printing from a computer, make sure you
installed the network software as described on the Start Here sheet.
Note: If you don't see the
Parent topic:

Printing a Network Status Sheet

You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the
2. Select Settings > General Settings > Network Settings > Network Status.
3. Select Print Status Sheet.
4. Press the
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic:

Printing a Network Connection Report

You can print a network connection report to view solutions to any problems you may have using your
product on a network.
1. Press the
2. Select Settings > General Settings > Network Settings > Connection Check.
home button to exit.
icon on the LCD screen and should be able to connect to your product directly
icon, repeat these steps to try again.
Wi-Fi Protected Setup (WPS)
home button, if necessary.
start button to print the status sheet.
Wi-Fi or Wired Networking
home button, if necessary.
43