Inspecting And Changing Fuses - Honda Civic 2016 Manual

Inspecting and Changing Fuses

Blown Fuse
Combined
Fuse
Fuse Puller
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
1. Turn the ignition switch to LOCK
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
uuFusesuInspecting and Changing Fuses
*1 . Turn
( 0 1Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse or new one of the
same specified amperage.
Use the charts to locate the fuse in question and
confirm the specified amperage.
2 Fuse Locations P. 589, 593
There is a fuse puller on the back of the engine
compartment fuse box cover.
597