Dvd Operations; Programming A Dvd; Repeat And Repeat A-B; Searching A Loaded Dvd - GPX HT219B User Manual

█

PROGRAMMING A DVD

1. While a DVD is playing, press the Prog/
Mem Button on the remote control.
2. Use the Number Keypad to type the
title number into the first blank, and the
chapter number into the second blank.
3. Repeat step 2 until the desired chapters
are programmed, then press the Play
Button.
4. To cancel the program, press the
Program Button, highlight "Clear
Program" and press the Enter Button on
the remote.
█

REPEAT AND REPEAT A-B

Press the Repeat Button once to repeat
•
the current chapter, twice to repeat the
current title, and three times to turn the
repeat function off.
• Press the A-B Button to repeat a
specified section of a DVD. Press once
to create a starting point (A), and press a
second time to create an ending point (B).
Press the A-B Button a third time to turn
the AB Repeat Function off.
█

SEARCHING A LOADED DVD

1. While a DVD is playing, press the Search
Button on the remote.
2. Press the Up and Down Buttons on the
remote to switch between searching for a
Title, Chapter, or specific Time.
Use the Number Keypad on the remote
3.
to type in a Title, Chapter, or Specific
Time.
4. Press the Enter Button on the remote to
go directly to the entered Title, Chapter,
or Specific Time.
5. Press the Search Button at anytime to
exit the Search Mode.

DVD OPERATIONS

7