Table of Contents
Advertisement
RECORDING
The data includes the channel number (press INPUT to select
the line input), start time and end time (including AM or PM).
The start date is automatically entered based on the VCR clock.
The date and/or speed can be changed when flashing.
6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One Time)
Channel
104 Cable
Start Time 08:00 PM
End Time
09:30 PM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to correct
Press MENU to save
Timer Recording with the
VCR Plus+ System
You can use the VCR Plus+ system to simplify timer
programming if you have cable TV and don't receive all
channels through a cable box or if you receive your TV signal
off-air.
Setting Up the Channel List
If you did not set up the VCR Plus+ programming channel list,
you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go tothe manual's second section, Setting Up Your VCR, for
more information about setting up VCR Plus+ system
channels.
Using the VCR Plus+ System
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language
0 Exit
2. Press 1 to display the VCR PLUS+ menu.
30
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Remember to leave your
cable box on and tuned
to the desired channel
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
CHANNELS
6 Preferences
7 Language
1 Auto Channel Search
2 Add/Remove Channels
0 Exit
3 Signal Type:
4 VCR Plus+ Channel list
5 Cable Box Setup
VCR+ Channel My Channel
5
0 Exit
4
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
If you receive all channels through
your cable box on Channel 3 or 4, you
must use the regular Timer Recording
method to record programs.
CABLE
46
--
--
--
Advertisement
Table of Contents
