Using Two Vcrs For Copying And Editing Tapes - GE VG2051 User Manual

RECORDING
Program 1 (One Time)
Channel 104 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to correct
Press MENU to erase
3. Press CLEAR to erase or MENU to see the next program.
Using Two VCRs For Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR .
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input). (See page 45 for more information.)
4. If you are using coaxial cables for the connection, tune the
recording VCR to channel 3 or 4 (the one selected on the
playback VCR).
If you are using audio/video cables, select the line input on
the recording VCR (L1 for the back jacks or L2 for the front
jacks).
5. Insert the tape you want to copy into the playback VCR. Insert
a blank tape with its safety tab in place into the recording
VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR , then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6–9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
CABLE BOX
IN
OR ANTENNA
OUT
PLAYBACK VCR
VIDEO AUDIO
IN
OUT
RECORDING VCR
VIDEO AUDIO
IN
OUT
TO TV
ANT. IN
RF OUT
3 CH. 4
OR
ANT. IN
RF OUT
3 CH. 4
OR
TO TV
27