2
CAUTION
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
Follow the instructions described below in advance before repairing:
Wear gloves.
In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what the parts are.
It is also recommended to have boxes ready to keep disassembled parts by group.
Handle the disassembled parts carefully. Clean and wash them properly.
Remove Batteries, except when they are necessary to check the operation of the machine.
3
NECESSARY REPAIRING TOOLS
Code No.
1R003
Retaining ring pliers ST-2N
1R026
Pipe 8-16-50
1R030
Pipe 17-25-50
1R033
Ring 10-60-15
1R242
Round bar 13-100
1R269
Bearing puller small
1R311
Retaining ring pliers L
1R411
Push bar for lead wires
4
LUBRICANT AND ADHESIVE APPLICATION
Makita grease FA No.2
Loctite 243 or ThreeBond 1342 (H)
Description
Description
assembling Compression spring 7
press-fitting Ball bearing 696ZZ
press-fitting Ball bearing 6000DDW
press-fitting Ball bearing 696ZZ
removing Ball bearing 6000DDW
removing Ball bearing 696ZZ
removing/ assembling Retaining ring R-26
fixing Lead wires
Apply a little unless specified in the figure.
Fig. 1
3 / 32
Use for
Amount