Advertisement
All manuals and user guides at all-guides.com
MWorks THX 650D CLE.book Page 3 Wednesday, January 8, 2003 10:03 AM
Using headphones
Muting the volume
For private listening, you can
❒
❒
connect headphones to the
Headphones Output of the
remote control.
This will mute all speakers.
❒
Select MASTER volume mode
❒
to adjust the volume of your
headphones.
❒
Select TREBLE mode to adjust
the treble levels of your
headphones.
Select SUB mode to adjust the
❒
bass levels of your headphones.
Notes
• When you disconnect your headphones
from the Headphones Output, the
speaker system will revert to the default
MASTER volume setting (two Level
Indicators lit), so as to prevent high
headphones volume levels from being
applied to the speaker system.
• REAR mode and CENTER mode are
disabled when you are using headphones.
Understanding
To temporarily mute speakers or
Input Connectors
headphones, press the MUTE
button once.
All lit Level Indicators will
MegaWorks THX 6.1 650D provides
blink during mute mode.
three sets of input connectors:
To return to normal listening,
❒
6.1 Analog inputs for up to 6.1
press the MUTE button again.
channels
Alternatively, you can disable
❒
Auxiliary Analog Stereo input
mute mode by pressing either
for up to 2 channels
or
.
Digital input for up to 5.1
❒
channels from multichannel
audio cards with digital output.
See "Connecting Input Devices" on
page 4 for details of cable
requirements. Basic cables for all the
inputs are supplied.
Note: In certain situations, you may
require additional cables that are not
provided.
Figure 2:
Input connectors on the rear panel
3
Advertisement
