Appendix B Running The Sample System - Fujitsu F2MC-16L User Manual

APPENDIX B Running the Sample System

REALOS/907 includes a sample program that you can refer to when developing user
programs.
I Sample system
The aim of the sample system is to show the basic structure of application programs running on
REALOS/907. The sample system contains some simple processing that uses basic REALOS/
907 functions. The system does not perform any particularly meaningful operations. The
emulator debugger and support board are required to view the operation of the sample system.
This appendix describes an example of the sample system that runs under Windows.
I Configuration of the sample system
Configure the sample system by making the connections and settings shown in Figure Ba below.
Instead of Hyperterm.exe, you can use any other communications software that can send and
receive ASCII characters.
There are two sample programs provided: sample 1 using the internal serial interface (UART)
for the MB90550 and sample 2 for the serial interface (MB90553A) mounted on the support
board. The sample programs are stored in the rtos\907\smpsys directory under the REALOS/
907 install directory
*
Figure Ba Sample System Environment
APPENDIX B Running the Sample System
37