Haier LT19Z6 Service Manual page 21

10) Input fixed [INPUT MODE FIXED]
Option "VARIABLE""FIXED","AC CTRL"or"AC/RC CTRL"
Default VARIABLE
1. "VARIABLE": The input source can be changed when power on.
2. "FIXED": The input source will be changed to the "INPUT MODE START"
setting value when power on.
Function
3. "AC CTRL": The input source will be changed to the"INPUT MODE
START"setting value when AC-ON.
4. "AC/RC CTRL": Same as "FIXED" function.
Remarks
11) Hotel mode setting [HOTEL MODE]
Option
Default
Function
Remarks
11) Hotel mode setting [HOTEL MODE]
Option
Default
Function
Remarks
12) TV TO USB
Option Press
Default
Press the">"key to do TV TO USB function, it will clone this TV set is setting
Function
and channel data to USB disk. When finish clone, it will display Done.
USB flash disk will have two files like "eepdata.bin" and "chdata.bin" when
Remarks
finish clone.
13) USB TO TV
Option Press
Default
Press the">"key to do USB TO TV function, it will clone USB disk is setting
Function
and channel data to TV set. When finish clone, it will display Done.
USB flash disk must have two files like "eepdata.bin" and "chdata.bin" in root
Remarks
directory.
All manuals and user guides at all-guides.com
RESET
Reset to the default value in hotel menu.
Press "OK" key on the remote control to do reset function.
"OFF"or"ON"(loop enabled)
OFF
OFF：HOTEL MODE is disabled
ON：HOTEL MODE is enabled.
To active hotel mode.
21