Stihl MS 194 T Instruction Manual page 20

Hide thumbs Also See for MS 194 T:
Table of Contents

Advertisement

English
► Clean the saw chain with a soft brush or
STIHL resin solvent.
► Mount the bar and chain.
15.3
Cleaning the Spark Plug
► Shut off the engine and engage the chain
brake.
► Allow the chainsaw to cool down.
1
2
► Turn the cover lock (2) counterclockwise 1/2
turn.
► Remove cover (1).
► Pull off the spark plug boot (3).
► If the area around the spark plug is soiled:
Clean it with a cloth.
► Unscrew the spark plug.
► Clean the spark plug with a cloth.
► If the spark plug is corroded: Replace the
spark plug.
► Insert and tighten down the spark plug.
► Press the spark plug boot (3) firmly home.
► Fit the cover (1).
► Rotate the shroud lock (2) clockwise until you
hear a click.
The cover lock (2) is secure.
15.4
Cleaning the Air Filter
15.4.1
Cleaning the fabric air filter
► Shut off the engine and engage the chain
brake.
20
3
3
► Rotate the shroud lock (1) a half turn counter‐
clockwise.
► Remove the shroud (2).
► Remove the air filter (3).
► Knock out the filter (3).
► Clean the filter (3) with a soft brush.
► If the filter (3) is damaged. Install a new filter
(3).
► Blow out the filter with compressed air from
the clean air side.
WARNING
■ Cleaning agent may cause irritation if it con‐
tacts the skin or eyes.
► Observe the information supplied with the
cleaning agent.
► Avoid contact with cleaning agents.
► In case of contact with the skin: Wash
affected areas with plenty of water and
soap.
► In case of contact with the eyes: Rinse eyes
with plenty of water for at least 15 minutes
and seek medical advice.
► If the air filter is very dirty:
3
► Install the filter (3).
► Place the shroud (2) in position.
► Rotate the shroud lock (1) clockwise until you
hear a click.
The shroud lock (1) is secure.
15.4.2
Cleaning the fleece air filter
► Shut off the engine and engage the chain
brake.
15 Cleaning
1
3
2
2
0458-568-8321-B
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents