Advertisement
Quick Links
Advertisement
Related Manuals for Pyle PGMC1NTN
Summary of Contents for Pyle PGMC1NTN
- Page 1 PGMC1NTN Nintendo Switch Game Console Handle Wireless Controller with LED Lights...
- Page 2 Please read this instruction manual thoroughly before using the unit. Please keep for future reference. Brief Introduction Please read this manual in detail before use in order to operate and use it correctly, and bring the superior performance of the product into full play.
- Page 3 Mode and Connection Instruction Wireless BT Switch mode 1. Turn on the Switch console, click the System Settings Menu Button on the Main Page interface and click the Airplane Mode option on the next-level option menu, and then click the Controller Connection (BT) to turn ON the Wireless BT function.
- Page 4 3. Press and hold the Y Button and then press the HOME Button for 2 seconds or press and hold the Pairing Button for 3 seconds to enter the Wireless BT search mode, LED 1 - LED 4 running lamp ashed. After successful connection, the Switch automatically distributes controller channel and the corresponding channel indicator light will always be on.
- Page 5 2.4G D-INPUT Mode: Press “-” + HOME button for 2 seconds to enter 2.4G search mode, LED 2 + LED 3 ash when pairing, LED 2 + LED 3 light is on after successful connection. 2.4G X-INPUT Mode: Press “+” + HOME button for 2 seconds to enter 2.4G search mode, LED 1 + LED 4 ash when pairing, LED 1 + LED 4 light is on after successful connection.
- Page 6 In Wireless BT mode, press the HOME button for 5 seconds to shut down the controller and disconnect from the Switch. Short press the Pairing button could to shut down the controller directly, short press the HOME button for 1 second to turn on and wake up the controller. Low Voltage Alarm When the battery of the controller is lower than 3.55V±0.1V, the current working channel light ash to indicate low battery.
-
Page 7: Electrical Specifications
SWITCH Motor Vibration Strength Adjustment Press and hold the L+ZL+R+ZR button for 3 seconds for adjustment, there are 3 levels of strength, 25%-50%-100% Default to 50% strength. After setting, the corresponding level lamp is always on for 1 second, and the motor vibrates for 1 second. Six-Axis Sensor Adjustment Press the “B”... - Page 8 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...