IBM BladeCenter HS20 Installation And User Manual page 15

The BladeCenter HS20 blade server has the bezel shown in the following
illustration.
Note: The illustrations in this document might differ slightly from the hardware.
Release
handles
A set of blank labels comes with the blade server. When you install the blade server
in the BladeCenter unit, write identifying information on a label and place the label
on the BladeCenter unit bezel. See the documentation for your BladeCenter unit for
recommended label placement.
Important: Do not place the label on the blade server or in any way block the
ventilation holes on the blade server.
3
Chapter 1. Introduction