GE GBSC0HBX Owner's Manual And Installation Instructions page 26

REMOVING THE DOORS
REMOVE THE
1
REFRIGERATOR DOORS
Tape the doors shut with masking tape.
A
B
Start with left-hand door first: Remove
the screw securing the center hinge cover, lift
the hinge cover and place to the side on top of
the refrigerator.
Remove the hinge cover on top of the
C
refrigerator door by removing the Phillips head
screw and pulling the cover up.
D Using a 5/16" socket ratchet/driver, remove
the bolts securing the top hinge to the cabinet.
Then lift the hinge straight up to free the hinge
pin from the socket in the top of the door.
Hinge Cover
Top Hinge
Installation Instructions
(Double Door Refrigerator Models only)
Remove hinge cover
(1 Phillips screw)
26
REMOVE THE REFRIGERATOR DOORS
1
(cont.)
Remove the tape and tilt the door away from
E
the cabinet. Lift the door off the center hinge
pin. Ensure that the plastic hinge pin thimble
remains on the hinge pin or inside door hinge
pin hole located in the bottom of the door.
F Set the door on a non-scratching surface with
the inside up.
REMOVE CENTER HINGE
2
Using a 5/16" socket ratchet/driver, remove the
bolts securing the center hinge to the cabinet.
Set the hinge and bolts aside.
REMOVE OPPOSITE DOOR
3
Follow the same procedure on the opposite
door. There are no center hinge covers on the
opposite side.
REMOVE FREEZER DRAWER
4
Refer to the Removing the Freezer Drawer
section for instructions.