Channel Settings - Kogan 6 EH6300 Series User Manual

SELECTING AN INPUT SOURCE
• Press the SOURCE button on the remote control, to display the input source list.
• Press the buttons to select the input source, and then press OK to confirm.
• You can access connected USB drives by selecting MEDIA.
NOTE: The first time you use this TV, make sure to go through the first time installation and
auto-search for all the DTV channels.

CHANNEL SETTINGS

To access CHANNEL settings, press the MENU button and go to CHANNEL.
Auto Tuning
Uses up and down button to select Auto Tuning, then press Enter button to enter sub-menu.
ATV Manual tuning
Search the channel manuallyYou can customise the color/sound system, frequency of channel.
DTV Manual tuning
Search the channel manually.Use the arrows button to select DTV Manual Tuning, then press OK button to
enter sub-menu.
Programme Edit
Via color buttons you can edit the programme, functions include delete, rename, skip channel, etc.You can
also add or erase the channel to the favorite channel list via FAV button on remote control.
Schedule List
Show the Schedule list, it is available under DTV source.
Signal Information
Press button to select signal information, then press the OK button to see the detailed information
about the signal. Only available when there is signal under DTV.