Glass Cooktop - GE Profile PP989SNSS Owner's Manual & Installation Instructions

Cleaning the glass cooktop.
Clean your cooktop after
each spill. Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE Cleaning Pad
®
for Ceramic Cooktops or a Scotch-Brite
Multi-Purpose No Scratch blue scrub
pad.
The CERAMA BRYTE ® Ceramic Cooktop
Scraper and all recommended supplies
are available through our Parts Center.
See instructions under "To Order Parts"
section on next page.
NOTE: Do not use a dull or nicked
blade.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE ® Ceramic Cooktop Cleaner.
This helps protect the top and makes
clean-up easier.
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep the
cooktop looking new.
Burned-On Residue
WARNING:
your glass surface may occur if you use
scrub pads other than the pad included
with your cooktop.
Allow the cooktop to cool.
Spread a few drops of CERAMA
BRYTE ® Ceramic Cooktop Cleaner
®
to the entire burned residue area.
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops,
rub the residue area, applying
pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade
scraper at approximately a 45°
angle against the glass surface and
scrape the soil. It will be necessary
to apply pressure to the razor
scraper in order to remove the
residue.
® Ceramic Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE
directly to the cooktop.
Use a paper towel or CERAMA
BRYTE
Cooktops to clean the entire cooktop
surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
® Ceramic
NOTE: It is very important that you DO
NOT heat the cooktop until it has been
cleaned thoroughly.
If any residue remains, repeat the
DAMAGE to
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
and a paper towel.
®
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE
Cleaner to the entire burned residue
area. Use the CERAMA BRYTE
Cleaning Pad to remove any
remaining residue.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
and a paper towel.
ge.com
® Ceramic Cooktop Cleaner
® Cleaning Pad for Ceramic
® Ceramic Cooktop Cleaner
® Ceramic Cooktop
®
® Ceramic Cooktop Cleaner
11