Advertisement
Assembly (continued)
7
INSTALL THE SHELF
Insert four shelf brackets (CC) into the slots on the side panels at the desired height. Make sure the four brackets (CC) are at
□
the same height. Place the shelf (E) over the shelf brackets (CC), and push it down onto the shelf brackets. Make sure the
shelf (E) is properly and safely locked by the upright hooks of the shelf brackets.
Slots on the inner front
side of side panel
E
CC
8
CONNECT THE CABINET TO THE WALL
The M6 x 40 hex tapping bolts (BB) should be drilled into
the stud of the wall.
Open the doors and fasten the cabinet to the wall with
□
two M6 x 40 hex tapping bolts (BB).
BB
Maintenance
□
Check all the screws and nuts periodically for tightness. Tighten them when necessary.
WALL
8
CC
Slots on the inner
back side of side
panel
Shelf locked by shelf bracket
after installation
WALL
BB
BB
Advertisement
