Page 2
Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS 1. KNOW YOUR TOOL 12. ALWAYS WEAR SAFETY GLASSES. Read and understand the owners manual and labels affixed to Always wear safety glasses (ANSI Z87.1). Everyday the tool. Learn its application and limitations as well as its eyeglasses only have impact resistant lenses, thet are NOT specific potential hazards.
Replace damaged, missing or failed parts before using the dust collector again. KC-2105C SPECIFICATIONS VOLTAGE ......................................110V HORSEPOWER ....................................1 HP R.P.M ......................................3450 Hz ........................................60...
TABLE OF CONTENTS General safety rules for power tools ..............................3 Safety before using your dust collector ..............................4 KC-2105c specifications ..................................4 Table of contents ....................................5 Unpacking......................................5 Assembly ......................................6-7 Electrical connections ....................................8 Power supply....................................8 Grounding ......................................8 110V operation ....................................8 Extension cords....................................8 ON/OFF switch ....................................8 Maintenance ......................................9...
ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY 6”- 8” Adjustable wrench or a 1/4” to 1-1/8” combination wrench set. ASSEMBLY 1. Attach the 4 caster wheels under the base using 4 pan hd. screws, washers hex. nuts. Insert the pan hd. screw through the base and secure with hex.
Page 7
FIGURE 6 7. Insert a retainer strap through the keepers of the filter bag (bag with KING CANADA logo) and attach it to the top part of the housing. Attach the top of the filter bag to the hanger. Insert the...
ELECTRICAL INFORMATION WARNING! ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE DUST COLLECTOR DISCONNECTED FROM THE POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! POWER SUPPLY WARNING: YOUR DUST COLLECTOR MUST BE CONNECTED TO PROPERLY GROUNDED OUTLET...
MAINTENANCE & TROUBLESHOOTING MOTOR CAUTION: TO AVOID INJURY OR ADVERSE REACTION TO Excessive dust in the motor could cause excessive heat. DUST, A HIGH PRESSURE HOSE SHOULD NOT BE USED ESPECIALLY IN POORLY VENTILATED AREAS. Every effort should be made to prevent foreign material from Operational hints entering the motor.