Transportation; Lifting; Manual Handling; Hoisting Method - Haier InoSens MRV SI AU032FSEUA Service Manual

The unit should be installed at the
place where the cold/hot air or
noise will not interfere the neighbours.

(3) Transportation

Lifting

In front of the unit shipped from unpacking location as close
as possible.
■ Do not place anything on the device.
■ Two ropes shall be used for lifting the outdoor unit.

Hoisting method

Hoisting to ensure that the level of outdoor machine, slowly
lifting.
1. Removal of outer packing is strictly prohibited
2. As shown by two ropes hoist with outdoor machine
packaging.
■ In order to ensure safety, maintain the level of lifting, slowly
lifting.
■
Do not lift the elevator to the packing and outer packing of the
equipment.
■ External protection should be used when lifting, such as cloth or
cardboard.

Manual handling

■ In the installation and commissioning, the outdoor machine do not put any irrelevant material, to ensure that there is no
debris inside the machine, or there may be a fire or accident.
■ The place where the water can flow
fluently.
■ The place where no other heat
source will affect the unit.
■ Pay attention to the snow against
clogging the outdoor.
■ In installation, install the anti-
vibration rubber between the unit
and the bracket.
CAUTION
CAUTION
■ The unit is better not be installed
■ The place where there is corrosive
■ The place blowing salty air (seaside
■ Exists the strong coal smoke.
■ The place with high humidity.
■ The place where there is device
■ The place where voltage changes
rope
CAUTION
31
at the below places, or it will cause
damage.
gas (spa area etc).
etc).
emitting Hertzian waves.
greatly.
Over 60 degrees
0.7~1.0 meters
Do not remove
packing tape and
packing box.
As shown in the
rope through
the wood base
around the lifting
hole.