Introduction; Purpose Of This Addendum; New Loudspeaker Models; Xlc127Dvx - Electro-Voice XLC127 Rigging Manual

0. Introduction

Purpose of this Addendum

This document is an addendum to the XLC Rigging Manual and describes several additional loudspeaker
system models and several rigging accessories for use with the XLC loudspeaker systems. In addition,
some updated information is presented for some items.
This addendum only provides additional information not found in the XLC Rigging Manual. Thus, the user
must consult the XLC Rigging Manual for all details concerning the structural ratings of the XLC loud-
speakers and for general rigging instructions to safely suspend an XLC loudspeaker system overhead.
Unless otherwise noted in the text in this addendum, all references to figures are for those contained in
this addendum. When figures are referenced from the XLC Rigging Manual, they are specifically refer-
enced as such.

New Loudspeaker Models

Several new loudspeaker models have been added to the XLC product line and are shown in Figures 1
and 2.
XLC127DVX: Three-way, LF/MB/HF loudspeaker system with a 120°H x 7.0°V coverage pattern. The
system includes one DVX3121 12-inch (305-mm) LF driver, two DN2065 6.5-inch (165-mm) MB driv-
ers and two ND6-16 3-inch (76-mm) HF drivers. An optional passive crossover may be purchased from
Electro-Voice that allows either biamp or triamp operation. The XLC127DVX utilizes the same 8° trapezoi-
dal enclosure as the XLC127, XLC127+ and XLC907DVX, and has the same standard XLC 8° rigging
frame secured to the left and right enclosure sides.
XLC907DVX: Three-way, LF/MB/HF loudspeaker system with a 90°H x 7.0°V coverage pattern. The
system includes one DVX3121 12-inch (305-mm) LF driver, two DN2065 6.5-inch (165-mm) MB driv-
ers and two ND6-16 3-inch (76-mm) HF drivers. An optional passive crossover may be purchased from
Electro-Voice that allows either biamp or triamp operation. The XLC127DVX utilizes the same 8° trapezoi-
dal enclosure as the XLC127, XLC127+ and XLC127DVX, and has the same standard XLC 8° rigging
frame secured to the left and right enclosure sides.
XLC215: Subwoofer loudspeaker system with two DVX3150 15-inch (380-mm) woofer. The XLC215
utilizes the same 12° trapezoidal enclosure as the XLC118 and has the standard XLC 12° rigging frame
secured to the left and right enclosure sides.
Several new XLC loudspeakers have been added to the product line since the original printing of the XLC
Rigging manual, as well as several new rigging accessories have been added. This addendum presents
those new items.
Electro-Voice XLC Touring Addendum 3