Page 4
Thank you for purchasing a power meter manufactured by Quadlogic Controls Corporation. Quadlogic has been designing, manufacturing, and selling digital electric metering systems for over 25 years. We appreciate your business. ontaCt nformatIon For sales and technical support, please contact Quadlogic Controls Corporation as indicated below.
Step 1: Mount the box The RSM-5c or RSM-5 back box is the enclosure for the meter head. The back box is supplied with the RSM-5c or RSM-5 fuse block installed in the box. 1. Choose a section of wall to mount the meter. This should be as close as possible to the distribution panel (preferably within 24”).
Page 6
3. Run the #12 AWG feeder phase tap wires through the conduit to the back box. 2. Mount the RSM-5c or RSM-5 back box to the wall, with mouting screws. Connect the distribution panel box to the RSM-5c or RSM-5 back box with a metal conduit.
- RSM-5c and RSM-5 Installation - Chapter 2 The following diagrams show the necessary fuse block connections for RSM-5 and RSM-5c meters. Figures 3-1, 3-2, and 3-3 show RSM-5c 3-phase 4-wire wye, 3-phase 3-wire delta, and 1-phase 3-wire (120/208V, 120/240V, or 277/480V network configuration) respectively.
-Menu Navigation - Chapter 4 The RSM-5c and RSM-5 user interface (LCD window) is located on the front Releasing the display scroll button at a given menu heading will allow the panel of the meter. It is easy to navigate the various sub-menus to read user to cycle through the registers listed under the selected menu heading as metering data, reset values and view configuration data. See Figure 4-1.
Verifying Meter Functionality - Verifying Meter Functionality - Chapter 5 It is very important to verify that the CTs of the RSM-5c and RSM-5 are III. Verifying Current and Power properly installed. Follow the steps below to verify the voltage, kWh reading, current, and power.
Use the following procedure to reset the Demand registers to zero: 1. Press and hold the Demand Reset button shown in Figure 4-1. 2. The LCD will initially display the Quadlogic Copyright message. 3. The LCD will then display the Dmdreset event screen: 4.
Example: Meter point with 400:0.1A CT LCD reading for meter is 3422.119kWh Table 7-1. Multiplier table for RSM-5c and RSM-5 meter with 0.1 AMP CTs. “XXX” represents voltage. The correct cumulative consumption (kWh) for this meter is 13688.476 kWh. (400 ÷ 100 = 4. Multiply face value, for consumption and demand values by 4.
Time-of-Use (TOU): Memory: • Up to 16 blocks per day available for all metering parameters (Exception: • 512 kilobyte non-volatile flash memory retains daily and interval data Pulse input data received by the RSM-5c and RSM-5 are not available in • During power outage: time-of-use blocks.) - Flash memory retains daily and interval data - Long-life lithium battery maintains time, logs incoming pulses and retains...
Chapter 8 Environment: Meter Kits (CTs included)……………pages 25-28 • Enclosure: NEMA 1 rated for indoor use only. (Outdoor NEMA 4X optional.) Meter Kits are available for the RSM-5c and RSM-5 products and include the • Temperature: -20˚C to +60˚C complete meter assembly (meterhead, fuse block and back box) as well as the • Humidity: 0-95% relative humidity (non-condensing) required current transformers (CTs) for operation.
Page 17
-Ordering Information - -Ordering Information - Chapter 9 Chapter 9 RSM-5c Meter Kits: kWh Meters RSM-5 Meter Kits: kWh for Large Service Meters Kits include meterhead, fuse block, back box and required current transformers. Enclosure: 6.9”H X 9.8”W X 4.9”D For 1600Amp &...
Notable Revision History Obligation under this warranty is limited to repair and/or replacement, at Quadlogic’s option, of the manufactured product and in no event shall Quadlogic DATE PAGE DESCRIPTION be liable for consequential or incidental damages.
Page 24
QUADLOGIC 33-00 Northern Blvd. Long Island City, NY 11101 Tel (212) 930-9300 Fax (212) 930-9394 www.quadlogic.com RSM5/5c MANR2.0.R...