Using Your Appliance; Loading Your Appliance; The Lower Basket; The Cutlery Basket - Zanussi ZDI 4041 Instruction Book

Using your appliance

Loading your appliance

Before placing dishes in the machine, remove any scraps of
food, to avoid clogging the filters and consequently reducing
the performance.
Do not load very small items which can fall through the
baskets.

The lower basket

The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Large dishes and lids should be arranged around the edge of
the basket, ensuring that the upper spray arm can turn freely.
UI57

The cutlery basket

Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Silver cutlery tends to go black if mixed with steel cutlery. Place
it in the cutlery basket separate from the others.
All manuals and user guides at all-guides.com
UI12
UI08

The upper basket

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and
underneath the fold-down
cup racks so that water can
reach all surfaces.
Light items (plastic bowls
etc.) should be loaded in the
upper basket and arranged
so they do not move.
Before closing the door, ensure that the spray arms can
rotate freely.

Adjusting the height of the upper basket

If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving
the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner
stops (A) of the upper
basket outwards and
slide the basket out.
2. Refit the basket in the
higher position and
replace the stops (A) in
their original position.
When the top basket is in the higher position it will only take
plates up to 20 cm in diameter and you will not be able to use
the raised cup racks.
After loading your machine always close the door, as an
open door can be a hazard.
7
US60
RC01