JK915BF/CF/WF
GE Profile
27" Built-In Single Oven
™
Undercounter Dimensions and Installation Information
Note: Oven is rated for use only under 30"
standard or sealed burner gas and selected
30" CleanDesign and Calrod® electric cooktops.
Cabinets installed adjacent to wall ovens must
have an adhesion spec of at least a 194°F
temperature rating.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
For answers to your Monogram,
GE Profile
®
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
®
800.626.2000.
Sealed Burner Gas Cooktop Installation
(Pub. 1-G003 pg. 107) May 11, 1993
Standard Burner Gas Cooktop Installation
Sealed Burner Gas Cooktop
(Pub. 1-G003 pg. 107) May 11, 1993
90° Street el
45° Elbow
Cabinet sides
Standard Burner Gas Cooktop
90° Street el
45° Elbow
Cabinet sides
or
™
service,
Gas or electric cooktops may be
installed over this oven. See cooktop
installation instructions for cutout size.
See label on top of oven for approved
cooktop models.
5" To center of 2" diameter
hole from countertop
2" Diameter hole (20-7/8"
from front of countertop
to hole center)
3-7/16"
To center of 2" diameter
hole from countertop
2" MIN. diameter hole
(23-1/4" from front
surface of countertop)
Dimension and installation information are shown in inches.
240V / 208V
Junction Box
Location
5
25
25" MIN.
25 1/4" MAX.
Allow 1"
unit overlap
27 5/8" MIN.
all edges
28 1/8" MAX.
3/4" Support
Platform Required
Must Support 150 Lbs.
7
Listed by
Underwriters
Laboratories
R
Specification Revised 1/05
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
36"
22" MIN.
Above
Typical
Countertop
Support
Platform
Height
24
220354