Table of Contents
Advertisement
12) Display color 15,0 box pattern(70x70mm) at mode 9.
13) DRIVE ADJ command.
14) Set B-DRIVE to 100 at DRIVE of the alignment
program.
15) Adjust R-DRIVE and G-DRIVE command to white
balance x=0.283 ± 0.003 and y=0.298 ± 0.003 on
the White Balance Meter with PC arrow keys.
16) Adjust SUB-CONTRAST command to 50±1FL of
the raster luminance.
17) Display color 15,0 full white patten at Mode 9.
18) COLOR ADJ. → LUMINANCE → ABL command.
19) Adjust ABL to 34 ± 1FL of the luminance.
20) Exit from the program.
6. Adjustment for Focus.
1) Display H character in full screen at Mode 7.
2) Adjust two Focus control on the FBT that focus
should be the best condition.
- 12 -
Advertisement
Table of Contents
