Tools You Will Need; Mounting Space - GE Profile Spacemaker JVM3670 Installation Instructions Manual

TOOLS YOU WILL NEED

# 1 and #2 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles

MOUNTING SPACE

16- 1 ⁄
2
36
2
66 or more
from the floor
to the top of
the microwave
Installation Instructions
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Bottom edge of
cabinet needs to
be 30 or more
from the cooking
30
min.
Backsplash
Ruler or tape measure and
straight edge
Electric drill with 3 ⁄ , 1 ⁄ and 5 ⁄
16 2 8
drill bits
Stud finder or Hammer (optional)
Level
NOTES:
•
The space between the cabinets must be 36
wide and free of obstructions.
•
This microwave oven is for installation over
surface
ranges up to 36 wide.
•
If you are going to vent your microwave oven
to the outside, see Hood Exhaust Section for
exhaust duct preparation.
•
When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
7
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape