LG WFT60A30D Service Manual page 24

https://appliancetechmanuals.com
3-5. OTRAS FUNCIONES
5) DELAY START (RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
1
Press the POWER button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the DELAY START (RESERVATION) button to set the time when the delayed
washing is to be completed.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
6
Close the lid.
Finish
Note
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing program, spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY START
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program .
(The laundry will be wrinkled if left for a long time after spinning.)
• Select the program for laundry on the Control panel.
This program will not work in WOOL and DELICATE Program.
• How to set the delay time.
Example : It's 7 a.m. now. If you'd like your wash to finish at
9 p.m. set the time as in the figure below.
When you push the button the reservation time changes
[3 4 5 ...12 14
• The appropriate quantity of Detergent marked next to the
WATER LEVEL of WATER•DETERGENT.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid
• When you press the START/PAUSE button the light will blink.
• Water will be supplied for 2 minutes after the start of the wash to
supplement the water the laundry has absorbed.
The washing will be finished according to the delayed time.
16 ... 48 3] repeatedly.
24
(RES.=DELAY)