Initial Setup Data - GE DigitalFlow DF868 Programming Manual

March 2008

Initial Setup Data

Model #
Software Vers.
System Units English
Totalizer Option
Vol. Units
Baud Rate
UART Bits
Network ID
MODBUS Baud Rate
Channel 1
Channel Status Off
Channel 1
Channel Label
Chan. Message
Energy Option
Vol. Units
Vol. Dec. Digits
Totalizer Units
Tot. Dec. Dig.
Mass Flow
Mass Flow Time
MDOT Dec. Dig.
Mass Totals
Mass Dec. Digits
Power
Power Dec. Dig.
Energy (Total)
Energy Dec. Dig.
Heat. or Cool.
Flow Meas.
B-2
After the Model DF868 flowmeter has been installed, some initial
setup data must be entered via the User Program, prior to operation.
Record that information in Table B-2 below.
Table B-2: Initial Setup Data
General Information
GLOBL-SYSTM
Metric
Auto Manual
GLOBL-COMM
CHx-ACTIVE
Trans Tranfl
CHx-SYSTM
On Off
Serial #
Setup Date
Vol. Dec. Digits
Totalizer Units
Tot. Dec. Dig.
MODBUS Parity
MODBUS Stop Bits
MODBUS Address
Channel 2 (if applicable)
Channel Status Off
Channel 2 (if applicable)
Channel Label
Chan. Message
Energy Option
Vol. Units
Vol. Dec. Digits
Totalizer Units
Tot. Dec. Dig.
Mass Flow
Mass Flow Time
MDOT Dec. Dig.
Mass Totals
Mass Dec. Digits
Power
Power Dec. Dig.
Energy (Total)
Energy Dec. Dig.
Heat. or Cool.
Flow Meas.
Trans Tranfl
On Off
Data Records