Canon FORMULA CR-50 Operation & Maintenance Manual page 8

3
Load the documents with their front sides facing right
and with their edges flush against the document load
mark.
4
Adjust the Eject Stopper in accordance with the
document.
5
Instruct scanning to start from the software application.
NOTE
When Using the Accompanying Scanning Utility for CR-50/80:
There are three scanning methods as follows. Follow the each
instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Document
Load Mark
Scan Batch to File
a Click [Scan Batch to File] from the [File] menu.
b Input the File name, and then click [Save].
c Select Simplex or Duplex, and then click [Start Scanning].
Scan Batch to Printer
a Click [Scan Batch to Printer] from the [File] menu.
b Select Simplex or Duplex, and then click [Start Scanning].
6
Scanning starts.
NOTE
When printing with the imprinter, ink may get on the leading edge of
the document because the documents are ejected onto the printed
surface.
8
Ink residue
Printed text
(back side)