Problems Starting Software Programs - Canon FB330P/FB630P Product Manual

Nothing displays when the CD-ROM is placed in the drive
Cause :
Solution:
Installation just doesn't seem to be working
Solution:

Problems Starting Software Programs

[No Scanners detected. Please check if CanoScan FB330P/FB630P is
connected properly.] message displays
Cause 1:
Solution:
CD-ROM will not automatically run the menu program
Start the menu program manually
Manually install the software by clicking the [Start] button, selecting
[Run] and typing one of the command lines below into the box. If
your CD-ROM drive is labeled other than [D:], substitute the
appropriate letter, such as [E:] or [F:], in the lines below
To install CanoCraft CS-P: [D:\CANOCRFT\ENGLISH\DISK1\SETUP.EXE]
To install ScanGear Toolbox CS: [D:\TOOLBOX\ENGLISH\DISK1\SETUP.EXE]
To install Ulead Photo Express 2.0 SE: [D:\PHOTOEX\SETUP.EXE]
To install Caere OmniPage Limited Edition: [D:\OPLE\DISK1\SETUP.EXE]
To install Adobe Acrobat Reader:
To read the electronic manuals on the CD-ROM, navigate to the
[D:\MANUAL] folder and open the PDF files in the respective
subfolders
Scanner not detected because the AC adapter is not correctly
plugged into the electrical outlet
Plug the AC adapter securely into the electrical outlet
(See p. 29)
[D:\ACROREAD\ENGLISH\AR32E301.EXE]
(See p. 26)
62