Advertisement
Using the Configuration Utility
A.
Status:
Displays the
MAC Address of the
Access Point that is
associated with the
DWL-120.
D.
Wireless Mode:
peer-to-peer networking.
E.
Encryption:
Displays the current encryption status of the wireless connection.
F.
Authentication:
Displays the current
Authentication
information.
J.
Packet Count:
transmitted and received.
Appendix
:
B.
SSID
The Service Set Identifier
is the name assigned to the
wireless network. The factory
SSID setting is set to default.
The factory setting is set to Infrastructure. Ad-Hoc mode is used for
A
B
C
D
E
F
G
H
I
J
G.
TxRate:
default setting is
Auto; meaning,
TxRate settings
are automatically
determined by
the DWL-120de-
pending on the
distance from the
access point.
Graphically displays the statistics of data
The
H.
Channel:
the channel
information. By
default, the channel
is set to 6. Please
note that the DWL-
120 will automati-
cally adjust channel
depending on the
Access Point.
C.
Frequency
Displays the current
frequency used by
the adapter.
Signal
I.
Displays
Strength / Link
Quality:
sents the
wireless signal
quality and
strength between
the access point
and the DWL-120.
The percentage
coincides with
the graphical bar.
:
Repre-
Advertisement
