New Installation Svp Procedure; New Installation Procedures Without The Pre-Installation At A Customer Site; Application - Hitachi DKC910I Installation Section

Hitachi Proprietary
Rev.0
INST(IN)14-01-10

14. New Installation SVP Procedure

14.1 New Installation procedures without the pre-installation at a customer site

14.1.1 Application

These procedures are applied to a new installation without the pre-installation at a customer site or the pre-
installation at the warehouse as shown below.
• Installing the micro programs into the storage system. Its version must be appropriate one.
• Installing the configuration information which is appropriate to the customer.
If these procedures are used in other cases, their processes are not assured.
DKC910I
Copyright © 2019, 2021, Hitachi, Ltd.
[INST(IN)14-01-10]