Panasonic CZ-RTC6BLW Operating Instructions Manual page 67

3. Make the remote controller
operate in Auto mode.
„ Remote controller
Follow the instructions on the app
screen.
„ Mobile device
Confirm that "Operating in Auto
mode" is displayed then tap "Next".
4. When the network connection
to the router is successful,
"Connected to router" is
displayed on the remote
controller screen.
• It may take some minutes for the
connection to be established.
„ Mobile device
Tap "Next".
Note
z If the remote controller screen does not change to "Connected to router", check the
wireless LAN router connections.
„ This completes the settings for connecting to the router. Go to Step 6 to
continue making the settings.
Wireless LAN settings
67
(EN)