Engine General Specifications - Yanmar 2V Series Operation Manual

SPECIFICATIONS

Engine General Specifications

Type
Combustion System
Starting System
Cooling System
Lubricating System
PTO Position
Direction of Rotation
Note:
1. The information described in Principal Engine Specifications is for a "standard" engine. To obtain the
information for the engine installed in your driven machine, please refer to the manual provided by the
driven machine manufacturer.
2. Engine rating conditions are as follows (SAE J1349, ISO 3046/1):
• Atmospheric Condition: Room temperature 77°F (25°C), Atmospheric pressure 29.53 in Hg (100 kPa,
750 mm Hg), Relative humidity 30%
• Fuel Temperature at Fuel Injector Pump Inlet: 104°F (40°C)
• With Cooling Fan, Air Cleaner, Muffler: Yanmar Standard
• After Engine Break-In Period. Output Allowable Deviation: ± 3%
• 1 PS = 0.7355 kW
• 1 hp SAE (Society of Automotive Engineers)= 0.7457 kW
94
V-Twin, Vertical Crankshaft 4-Cycle, Water Cooled Diesel Engine
Swirl Pre-Combustion
Electric Starting
Radiator
Forced Lubrication With Trochoid Pump
Opposite of Flywheel Side
Counterclockwise Viewed from Opposite of Flywheel Side
2V Operation Manual