Advertisement
TROUBLESHOOTING
PROBLEM
The display doesn't work
The appliance doesn't warm up
The display shows:
off (Probe failure 1)
The display shows:
off (Probe failure 2)
The display shows: Ht
(High temperature)
The display shows:
is off
Be sure it is plugged in and that the
electrical outlet is working
The safety device may have switched
off the appliance
The temperature may be set too low
It indicates that the room temperature
+ unit
sensor has failed
It indicates that the probe of the
+ unit
internal safety of the device has failed
The unit has reached a too high
internal temperature
The tip-over switch has been activated Make sure the appliance is standing upright
and unit
CAUSE
15
SOLUTION
Plug into the power outlet
Remove the obstruction and let the appliance
cool down. If the appliance doesn't work
please contact De'Longhi Customer Service
Set the temperature to a higher value
Please contact De'Longhi Customer Service
Please contact De'Longhi Customer Service
Check that the unit is not covered and let
the appliance cool down. When the product
internal temperature decreases, the alarm
will disappear.
If the appliance doesn't work please contact
De'Longhi Customer Service
on a flat surface. If the appliance doesn't work
please contact De'Longhi Customer Service
Advertisement
